To avoid any confusion the first thing I want yo say is that this MOC is old, it passed away many years ago.
I desing this MOC to enter in a competition organized by a store in Madrid in March 2010.
This creation can cross a free space between 80 and 105 cm.
It is powered by 6 PF motors, 3 IR recevers and PF AA battery.
- 2M motors for drive, one for each side
- XL motor for the first elevation step
- M motor for the couterweigh
- XL motor for the second elevation step
- M motor to open the bridge
Here the complete secuence to cross a
Step 1 - Place the bridge layer close to the precipice
Step 2 - Lift the first step of the bridge
Step 3 - Open the counterweight
Step 4 - Open the bridge
Step 5 - Lower the complete bridge
Step 6 - Go back a little to drop the bridge
Step 7 - Lift a little bit the main arm
Step 8 - Cross the bridge!!. The deformation of the bridge is done deliberately to reduce the bridge swing. Without that deformation the bridge becomes unstable.
Step 9 - Make a 180 degrees turn.
Step 10 - Lower the main arm and go on a little to connect the arm to the bridge.
Step 11 - Lift the bridge and repeate the steps 1 to 4 in the oposite order.
Unfortunately I don't have more picture or files, but here you a little video in action!!
Enjoy it!!