This is a little MOC designed in a few hours to get my mind far of my new car for a while...
It is built in scale 1/10. And the weight is only 450 grams.
![]()
This MOC is based in the small French buggy AXR 400.
![]()
![]()
![]()
The final size is 30x18x15 studs.
![]()
It uses a PF M motor for steering, with auto-center.
![]()
For drive it has a PF L motor, it it can use a M if you want.
You can change easily the gear ratio between: 1:3(8kph), 1:1.67(4.5kph) or 1:1(2.7kph).
![]()
The suspension is independent in the front axle, and a pendular axle in the back.
![]()
![]()
![]()
As always a little video:
Finally you can download the complete instructions here: DOWNLOAD ()
It is built in scale 1/10. And the weight is only 450 grams.
This MOC is based in the small French buggy AXR 400.
The final size is 30x18x15 studs.
It uses a PF M motor for steering, with auto-center.
For drive it has a PF L motor, it it can use a M if you want.
You can change easily the gear ratio between: 1:3(8kph), 1:1.67(4.5kph) or 1:1(2.7kph).
The suspension is independent in the front axle, and a pendular axle in the back.
As always a little video:
Finally you can download the complete instructions here: DOWNLOAD ()